Kiʻekiʻe kiʻekiʻe Kina kala maoli G10 Epoxy aniani fiber laminated pepa
Hōʻike huahana
G10 Epoxy aniani fiber laminated pepa (Maʻamau):Hoʻopili ʻia kēia huahana e ka wela kiʻekiʻe a me ke kiʻekiʻe kiʻekiʻe me ka lole aniani uila i hoʻopili ʻia me ka resin epoxy. Me nā waiwai mechanical a me dielectric kiʻekiʻe, maikaʻi ka wela a me ka pale ʻana, me ka machinability maikaʻi; Hiki i kēia huahana ke hoʻokō i ke kūlana EU ROHS, ʻo ia. hoʻolaha ākea i ka hikina hikina o Aisa, ʻEulopa, India, etc.ʻO ka mea koʻikoʻi ʻo kēia G10 laminate ʻo Halogen-free a me ke ahi retardant, kahi eco-friendly a hiki ke ʻae ʻia e nā mākeke ʻEulopa a me ʻAmelika.
ʻAʻole ʻo G10 he inoa waiwai, akā he papa waiwai, ʻo ka inoa G10 mai ka NEMA grading system kahi i hoʻopaʻa ʻia ai nā "G" no ka "Glass fiber base"
Hoʻokō me nā kūlana:
E like me GB/T 1303.4-2009 uila thermosetting resin industrial hard laminates - Māhele 4: epoxy resin hard laminates, IEC 60893-3-2-2011 insulating mea - uila thermosetting resin industrial hard laminates - Māhele 3-2 o kēlā me kēia mea. kikoʻī EPGC201.
Nā hiʻohiʻona
1. High mechanical waiwai;
2.High dielectric waiwai;
3.Good moisture kū'ē;
4.Good pale wela;
5.Good machinability;
6. Ke kū'ē i ka mahana: Papa B
7. Halogen-noa a me ke ahi retardant
Papa kuhikuhi hana nui
He kūpono no ka noi ʻana i nā koi hoʻokalakupua uila kiʻekiʻe o nā huahana, e like me ka FPC reinforcement plate, PCB drilling pad, fiberglass meson, glass fiber board potentiometer carbon film paʻi, precision tour stars gear grinding (chip), precision test plate, uila (electrical) paʻipaʻi paʻa paʻa paʻa paʻa, paʻa insulating, papa insulation transformer, ʻāpana hoʻokaʻawale kaʻa, huila wili, papa hoʻololi uila, etc.
Papa kuhikuhi hana nui
| ʻAʻOLE. | MEA | UNIT | KA WAIWAI INDEX | ||
| 1 | ʻO ka mānoanoa | g/cm³ | 1.8-2.0 | ||
| 2 | Ka nui o ka hoʻoheheʻe wai | % | ≤0.5 | ||
| 3 | ʻO ka ikaika kūlou pololei | MPa | ≥340 | ||
| 4 | ʻO ka ikaika hoʻoemi kūpaʻa | MPa | ≥350 | ||
| 5 | Ka ikaika hopena like (charpy type-gap) | KJ/m² | ≥37 | ||
| 6 | Ka ikaika ʻoki like | Mpa | ≥34 | ||
| 7 | Ka ikaika tensile | MPa | ≥300 | ||
| 8 | Ka ikaika uila kū pololei （i loko o ka aila o 90 ℃ ± 2 ℃） | 1mm | KV/mm | ≥14.2 | |
| 2mm | ≥11.8 | ||||
| 3mm | ≥10.2 | ||||
| 9 | ʻO ka uila hoʻohaʻahaʻa like (ma ka aila o 90 ℃ ± 2 ℃) | KV | ≥40 | ||
| 10 | Dielectric dissiption factor (50Hz) | - | ≤0.04 | ||
| 11 | Kū'ē Kū'ē | Maʻamau | Ω | ≥5.0×1012 | |
| Ma hope o ka hoʻoulu ʻana no 24 mau hola | ≥5.0×1010 | ||||
| 12 | Hiki ke puhi (UL-94) | pae | V-0 | ||
