Papa F Halogen-ʻole ahi retardant Epoxy aniani fiber laminated pepa
Hōʻike huahana
Hana ʻia kēia huahana me ka lole uila non-alkali fiber fiber e like me ke kumu kākoʻo, me ka TG phosphorous a me ka nitrogen flame retardant epoxy resin e like me ka mea hoʻopaʻa ma o nā huahana laminated kaomi wela, ka ikaika mechanical kiʻekiʻe a me ka haʻahaʻa haʻahaʻa haʻahaʻa haʻahaʻa ma lalo o ka mahana maʻamau, ke kiʻekiʻe kiʻekiʻe ma lalo o 155 ℃ mau ka ikaika mechanical ikaika, nā waiwai uila maikaʻi ma lalo o ka maloʻo a me ka wai maloʻo, hiki ke hoʻohana ʻia i ka ʻaila Fsulating. Pili i nā ʻano kaʻa, uila, uila a me nā māla ʻē aʻe, hoʻohana nui ʻia i ka moto, nā mea uila e like me nā ʻāpana insulation structure, high voltage switch-gear, high voltage switch (e like me ka motor stator insulation material ma nā wēlau ʻelua, rotor end plate rotor insulation piece, slot wedge, terminal board, etc.).
Nā hiʻohiʻona
1.Good uila paʻa ma lalo kiʻekiʻe humidity;
2.High mechanical ikaika ma lalo o ke kiʻekiʻe wela;
3.Moisture kū'ē;
4.Heat kū'ē;
5. Ke kū'ē i ka mahana: Grade F
6. Halogen-noa a me ke ahi retardant
Hoʻokō me nā kūlana
E like me GB/T 1303.4-2009 uila thermosetting resin laminates paʻakikī - Māhele 4: epoxy resin hard laminates.
ʻO keʻano: pono e palahalaha kaʻili, me kaʻole o nā'ōhū, nā lua a me nā wrinkles, akā, uaʻaeʻia nā hemahema'ē aʻe i piliʻole i ka hoʻohanaʻana, e like me: nā'ōpala, ka indentation, stains a me kekahi mau kiko.
Hoʻokō me nā kūlana
He kūpono no nā ʻano kaʻa like ʻole, nā mea uila, uila a me nā kahua ʻē aʻe.
Papa kuhikuhi hana nui
| ʻAʻOLE. | MEA | UNIT | WAIWAI INDEX | ||
| 1 | ʻO ka mānoanoa | g/cm³ | 1.8-2.0 | ||
| 2 | Ka nui o ka hoʻoheheʻe wai | % | ≤0.5 | ||
| 3 | ʻO ka ikaika kūlou pololei | Maʻamau | MPa | ≥380 | |
| 155±2 ℃ | ≥190 | ||||
| 4 | Ka ikaika hoʻoemi | Kū pololei | MPa | ≥300 | |
| Kaulike | ≥200 | ||||
| 5 | Ka ikaika o ka hopena (ʻano charpy) | ʻAʻohe puka ka lōʻihi | KJ/m² | ≥147 | |
| 6 | Ka ikaika pili | N | ≥6800 | ||
| 7 | Ka ikaika tensile | Ka lōʻihi | MPa | ≥300 | |
| Kaupae | ≥240 | ||||
| 8 | Ka ikaika uila kū pololei （i loko o ka aila o 90 ℃ ± 2 ℃） | 1mm | KV/mm | ≥14.2 | |
| 2mm | ≥11.8 | ||||
| 3mm | ≥10.2 | ||||
| 9 | ʻO ka uila hoʻohaʻahaʻa like (1 min i ka aila o 90 ℃ ± 2 ℃） | KV | ≥40 | ||
| 10 | Dielectric dissiption factor (50Hz) | - | ≤0.04 | ||
| 11 | Kū'ē Kū'ē | Maʻamau | Ω | ≥1.0×1012 | |
| Ma hope o ka hoʻoulu ʻana no 24 mau hola | ≥1.0×1010 | ||||
| 12 | Hiki ke puhi (UL-94) | pae | V-0 | ||
