3255 Hoʻololi ʻia ʻo Diphenyl Etera Glassfiber Laminated Pepa
Hōʻike huahana
ʻO kēia huahana kahi huahana laminated i hana ʻia me ka lole aniani alkali-free i hana ʻia me ka lole aniani alkali-free e like me ka mea kākoʻo, ma ke kaomi wela me ka diphenyl ether resin i hoʻololi ʻia e like me ka binder. .Good radiation resistanceit, kūpono no ka papa H motor, nā lako uila e like me nā ʻāpana hoʻolālā insulation.
Nā hiʻohiʻona
1.High mechanical ikaika ma lalo o ke kiʻekiʻe wela;
2.Good uila paʻa ma lalo o kiʻekiʻe wai;
3.High wela pale;
4.High moisture kū'ē;
5.Good machinability;
6.Good radiation kū'ē
7. Ke kū'ē i ka mahana: Grade H
Hoʻokō me nā Kūlana
E like me GB/T 1303.4-2009 uila thermosetting resin laminates paʻakikī - Māhele 4: epoxy resin hard laminates.
ʻO ka helehelena: pono e palahalaha ka ʻili, me ka ʻole o nā ʻōpū, nā lua a me nā wrinkles, akā ʻae ʻia nā hemahema ʻē aʻe i pili ʻole i ka hoʻohana ʻana, e like me: scratches, indentation, stains a me kekahi mau kiko. ʻAʻole e hoʻokaʻawale ʻia ka maka hope a nahā.
Palapala noi
He kūpono no ka mīkini papa H, nā lako uila e like me nā ʻāpana insulation.
Papa kuhikuhi hana nui
| ʻAʻOLE. | MEA | UNIT | KA WAIWAI INDEX | ||
| 1 | ʻO ka mānoanoa | g/cm³ | 1.8-2.0 | ||
| 2 | Ka nui o ka hoʻoheheʻe wai | % | ≤0.5 | ||
| 3 | ʻO ka ikaika kūlou pololei | Maʻamau | MPa | ≥340 | |
| 180±5 ℃ | ≥170 | ||||
| 4 | Ka ikaika hoʻoemi | Kū pololei | MPa | ≥350 | |
| 5 | Ka ikaika hopena (ʻano charpy) | āpau | KJ/m² | ≥33 | |
| 6 | Ka ikaika pili | N | ≥5700 | ||
| 7 | Ka ikaika tensile | Ka lōʻihi | MPa | ≥300 | |
| 8 | Ka ikaika uila kū pololei （i loko o ka aila o 90 ℃ ± 2 ℃） | 1mm | KV/mm | ≥20.0 | |
| 2mm | ≥18.0 | ||||
| 3mm | ≥16.0 | ||||
| 9 | ʻO ka uila hoʻohaʻahaʻa like (1 min i ka aila o 90 ℃ ± 2 ℃） | KV | ≥30 | ||
| 10 | Dielectric dissiption factor (50Hz) | - | ≤0.04 | ||
| 11 | Kū'ē Kū'ē Kū'ē | Maʻamau | Ω | ≥1.0×1013 | |
| Ma hope o ka hoʻoulu ʻana no 24 mau hola | ≥1.0×1010 | ||||
| 12 | Kū'ē Kū'ē Volumn | Maʻamau | Ω.m | ≥1.0×1011 | |
| Ma hope o ka hoʻoulu ʻana no 24 mau hola | ≥1.0×109 | ||||
| 180±5 ℃ | ≥1.0×108 | ||||
